BH66F2663
Impedance Phase Measurement Flash MCU
The device is a Flash Memory 8-bit high performance RISC architecture microcontroller which includes a BIA (Bio-Impedance Analysis) module and a multi-channel 24-bit Delta Sigma A/D converter, designed for applications that interface directly to analog signals and which require a low noise and high accuracy analog-to-digital converter, such as weight and fat measurement applications.
For memory features, the Flash Memory offers users the convenience of multi-programming features. Other memory includes an area of RAM Data Memory as well as an area of true EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.
Analog features include a multi-channel 24-bit Delta Sigma A/D converter and Bio-Impedance Analysis circuitry. Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Communication with the outside world is catered for by including fully integrated SPI, I2C and UART interface functions, some popular interfaces which provide designers with a means of easy communication with external peripheral hardware. Protective features such as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments.
A full choice of external, internal and high and low oscillators functions are provided including two fully integrated system oscillators which require no external components for their implementation. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimise microcontroller operation and minimise power consumption.
Measuring bio-impedance uses a technique whereby an AC current flowing through the human body is measured and then used to calculate a bio-impedance value. The specialised circuits to do this are a weight measurement circuit and a fat measurement circuit. The weight measurement circuit uses an external load cell to output a signal, which is amplified by an operational amplifier and then converted using an A/D converter. The converted value is the calculated weight. Regarding the fat measurement, an AC signal flows through human body via an electrode slice, this signal is amplified by an internal operational amplifier and then converted by the A/D converter. The converted value will be used to calculate the corresponding bio-impedance value.
The inclusion of flexible I/O programming features, a 16-bit MDU, Time-Base functions along with many other features ensure that the device will be highly capable of providing MCU solutions for Bio-impedance measurement applications.
Previous
Next
Product Details
CPU Features
Peripheral Features
DataSheet | Package
Development Tools
CPU Features
- Operating Voltage
♦ fSYS=4MHz: 2.2V~5.5V
♦ fSYS=8MHz: 2.2V~5.5V
♦ fSYS=12MHz: 2.7V~5.5V
♦ fSYS=16MHz: 3.3V~5.5V - Up to 0.25μs instruction cycle with 16MHz system clock at VDD=5V
- Power down and wake-up functions to reduce power consumption
- Four Oscillators
♦ High Speed Internal 4/8/12MHz RC – HIRC
♦ High Speed External Crystal – HXT
♦ External 32.768kHz Crystal – LXT
♦ Internal 32kHz RC – LIRC - Multi-mode operation: FAST, SLOW, IDLE and SLEEP
- Fully integrated internal oscillators require no external components
- All instructions executed in 1~3 instruction cycles
- Table read instructions
- 115 powerful instructions
- 8-level subroutine nesting
- Bit manipulation instruction
Peripheral Features
- Flash Program Memory: 16K×16
- Data Memory: 1024×8
- True EEPROM Memory: 256×8
- Watchdog Timer function
- In Application Programming – IAP
- 35 bidirectional I/O lines
- Programmable I/O port source current for LED applications
- 3 differential or 6 single-end channels 24-bit resolution Delta Sigma A/D converter
- Two pin-shared external interrupts
- Multiple Timer Modules for time measure, input capture, compare match output, PWM output or single pulse output function
♦ 1 Standard type 16-bit Timer Module – STM
♦ 3 Periodic type 10-bit Timer Modules – PTM0~PTM2 - Serial Interface Module with Dual SPI and I2C interfaces – SIM
Single Serial Peripheral Interface – SPIA - Fully-duplex Universal Asynchronous Receiver and Transmitter Interface – UART
- Dual Time-Base functions for generation of fixed time interrupt signals
- Low Voltage Reset function
- Low Voltage Detect function
- Bio-impedance Analysis circuit
- 16-bit Multiplication Division Unit
- Package types: 48/64-pin LQFP
DataSheet | Package
Development Tools
HT8 Type MCU debug adapter
e-Link: Holtek OCDS/ICP adaptor Buy from a dealer
HT8 Flash MCU Production Writer
e-WriterPro Buy from a dealer
Design And Development
BMHB1007 Impedance Phase Angle Measurement Development Board
Previous
Next
Description
The BMHB1007 is a development board of Holtek 8-bit Impedance Phase Flash MCU which is designed and produced by Best Health Electronics Inc.
The BH66F2663 includes a BIA (Bio-Impedance Analysis) module and a multi-channel 24-bit Delta Sigma A/D converter, designed for applications that interface directly to analog signals and which require a low noise and high accuracy analog-to-digital converter, such as weight and fat measurement.Purchasing
BMHB1007-demo Eight-electrode Body Fat Scale Development Kit
Previous
Next
Description
The BMHB1007-demo is an eight-electrode body fat scale development kit of the BMHB1007. It includes a body fat scale, a handle, and a Bluetooth module, and needs to use with the BMHB1007.
Product includes:scale * 1 /handle * 1 /bluetooth module * 1