BH67F2752
24-bit Delta Sigma A/D Flash MCU Integrated Regulator & 2 set OPAs & LCD Driver
The BH67F2752 is a Flash Memory A/D type 8-bit high performance RISC architecture microcontroller which includes a multi-channel 24-bit Delta Sigma A/D converter, designed for applications that interface directly to analog signals and which require a low noise and high accuracy analog-to-digital converter. Offering users the convenience of Flash Memory multi-programming features, this device also includes a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of true EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.
Analog features include a multi-channel 24-bit Delta Sigma A/D Converter and Operational Amplifier fucntions. Extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Communication with the outside world is implemented using fully integrated SPI and UART interfaces, popular interfaces which provide designers with a means of easy communication with external peripheral hardware. Protective features such as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments.
A full choice of internal low and high oscillator functions are provided including two fully integrated system oscillators which require no external components for their implementation. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimise microcontroller operation and minimise power consumption.
The inclusion of flexible I/O programming features, Time Base functions along with many other features ensure that the device will find excellent use in applications such as weight scales, electronic metering, environmental monitoring, handheld instruments, electronically controlled tools, motor driving in addition to many others.
Product Details
- Operating Voltage
fSYS=8MHz: 2.2V~5.5V - Up to 0.5μs instruction cycle with 8MHz system clock at VDD=5V
- Power down and wake-up functions to reduce power consumption
- Oscillators
– Internal High Speed 8MHz RC Oscillator – HIRC
– Internal Low Speed 32kHz RC Oscillator – LIRC - Fully integrated internal oscillators require no external components
- Multi-mode operation: FAST, SLOW, IDLE and SLEEP
- All instructions executed in 1~3 instruction cycles
- Table read instructions
- 115 powerful instructions
- 6-level subroutine nesting
- Bit manipulation instruction
- Flash Program Memory: 8K×16
- RAM Data Memory: 384×8
- True EEPROM Memory: 128×8
- Watchdog Timer function
- Up to 17 bidirectional I/O lines
- 4 differential or 8 single-end channels 24-bit resolution Delta Sigma A/D converter
- LCD Driver function
– SEGs × COMs: 32×4 or 30×6
– Duty type: 1/4 duty or 1/6 duty
– Bias level: 1/3 bias
– Bias type: R type
– Waveform type: type A or type B - Two pin-shared external interrupts
- Timer Modules for time measure, compare match output or PWM output function
- Fully-duplex Universal Asynchronous Receiver and Transmitter Interface – UART
- Single Serial Peripheral Interface – SPI
- Dual Time Base functions for generation of fixed time interrupt signals
- Low Voltage Reset function – LVR
- Low Voltage Detect function – LVD
- Package types: 48/64-pin LQFP
HT8 Type MCU debug adapter
e-Link: Holtek OCDS/ICP adaptor Buy from a dealer
HT8 Flash MCU Production Writer
e-WriterPro Buy from a dealer
Design And Development
BMHB6003-plus Infrared Thermometer Development Board (with sensor)
Description
The BMHB6003-plus is a development board for Holtek Infrared Thermometer Flash MCU BH67F2752. It is designed and produced by Best Health Electronics Inc.
The BH67F2752 includes a fully integrated Infrared Thermometer circuit, which includes an OPA, LDO, PGA, and a 24-bit Delta-Sigma A/D Converter. The EEPROM memory can be automatically calibrated during production by software and the UART / SPI interfaces can be used for connecting to peripheral devices such as Bluetooth etc.