Overview

BMH08002-4 is a blood oxygen and pulse rate module from BestModule, integrating a reflective SpO2/heart-rate sensor (660nm red + 905nm infrared) with a Holtek MCU to measure blood oxygen saturation (SpO2), pulse rate and perfusion index (PI). The host reads results and sets operating modes over UART, suiting fingertip oximetry, smart wearables and health monitoring products.

Features

  • SpO2 range 70–99%, accuracy ±2%
  • Pulse rate range 30–250BPM, with perfusion index (PI) output
  • Integrated reflective SpO2 sensor (660nm red + 905nm infrared)
  • UART interface, direct output of SpO2, pulse rate and PI

Technical Specifications

Specification Table

Measured Parameters
SpO2, pulse rate, perfusion index (PI)
SpO2 Range
70–99 %
SpO2 Accuracy
±2 %
Pulse Rate Range
30–250 BPM
Interface
UART
Pulse Rate Accuracy
±2BPM (30–100) / ±2% (100–250)
Perfusion Index (PI) Range
0.5–25 %
Sensor Type
Integrated reflective SpO2 sensor (660nm/905nm)
Operating Voltage
3.3–5.5 V
Operating Current
5 typ / 16 max @3.3V mA
Sleep / Power-down Current
110 / 1 (EN=0) μA
Operating Temperature
10–40 ℃
Storage Temperature
-20–55 ℃
Dimensions
27×11 mm

Application Areas

Fingertip SpO2 measurement, smart wearables, health monitoring devices

Documents

BMH08002-4

Contains electrical characteristics, register descriptions, and system architecture. Please refer to it before solution design and software development.

Follow Our WeChat
Scan QR code to follow us on WeChat

Scan QR code to follow us on WeChat

+86-769-26261311info@e-besthealth.com